Specification of Ball Bearing Units
NSK bearing unit is a combination of radial ball bearings, seals, and housing of high quality iron or steel press, which come in various forms of cor. Outer surface of the bearing housing and the internal surface of the round, so this self aligning unit. In the construction of ball bearings for the unit is like a steel ball and a follower of the same type as on series 62 and 63 of the bearings in the Groove that was used. Duplex a seal consisting of a combination of segel is a synthetic rubber oil-proof and it meant a are provided on both sides.
Pillow Blocks
Pillow blocks with bearing mounted on a rigid construction of simple houses is the most common bearing units. They are widely used for the various transmission equipment and machinery.
Square Flanged UnitsOng >
This House has a square flange bearings that can be easily attached to the engine with four bolts.
With simple face increases, the Unit bearing is widely used.
Flanged Units, Oval
g "style =" width: 120px; height: 120px; "/This House has bearing > flanges oval which can be easily installed to the engine by two bolts.
The type of the bearing unit is suitable where installation space is limited or where necessary to minimize the distance between the shaft. The distance between the bolt holes of the flange oval is generally equal to the distance between bolt holes position diagonal of a square flange type.
Ball Bearings Set Screw Type