Deep Groove Ball Bearings

Last Updated
02 May 2023
Minimum Order

NSK produces a wide range of ball bearings in the Groove. These pads are the most common type and is used in a wide variety of applications.

Single-Row Deep Groove Ball Bearings

Pressed Steel Cage

Single-row deep groove ball bearings are the most common types of rolling bearings. The adoptionnaannya is very broad.
In addition to open this type of bearings, bearing steel shields or seals often rubber mounted on one or both sides and prelubricated with oil. Also, his ring is sometimes used in the suburbs. For cage, the steel press is the most common.
For ball bearings in large cages, brass flow machines are used.
the enclosure of the engine is also used for high speed applications.

Extra Small Balesl Miniature Ball Bearings and plain Bearings

miniature bearings and balls can be divided into two basic types, in the Groove and angular contact. The first (grooves) can be further divided into the five following classes depending on the details of their designs:

-standard type
-ring-stick outer ring road
-the inner ring is extended
/> -Types of expanded where the one ring has a radial thickness greater than normal compared to the width of the bearing.
-Thin type part where both extra thin ring in the direction of radial. They also can be classified as: open, unprotected, or sealed.

Maximum-Type Ball Bearings

Maximum-Type Ball Bearing contains large amounts of balls than normal in the groove ball bearings due to fill slots on the inside and outside of the ring. Because the slot filling them, they are not suitable for applications with high axial load. BL2 and BL3 bearing types have the same boundary dimensions with those of the single-row deep groove ball bearings Series 62 and 63 respectively. In addition to open, type ZZ type shielded bearings are also available. When using these pads, it is important for slot downloadgisi at the outer ring is outside the zone of load as much as possible. they pressed steel cages.

Magneto Bearings

The Groove in the slightly shallower than magneto bearings Groove bearings. Since the outer ring has a shoulder on only one side, the outer ring can be removed. It is often advantageous to the installation. In the cities

Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :



Foto dari Pembeli

Ulasan dari Pembeli

Dengan Foto
Request a Quote
Produk Siap di Pesan
Rp 0
Powered by Indotrading.